WEBVTT

0
00:00:04.000 --> 00:00:05.000
Welcome to our Tuner4TRONIC lab.

1
00:00:06.000 --> 00:00:13.000
Tuner4TRONIC is a tool set used by luminaire manufacturers to program driver in luminair manufacturing.

2
00:00:14.000 --> 00:00:20.000
Anyhow, the same toolset can also be used by installers and by maintenance team to program drivers on-site.

3
00:00:21.000 --> 00:00:26.000
Tuner4TRONIC Field app is an app running on iOS and Android

4
00:00:27.000 --> 00:00:34.000
that enables you to read and write data via NFC just by using your mobile phone.

5
00:00:35.000 --> 00:00:45.000
This saves time and money, because you don't need to send around drivers for analysis or for configurations in case of replacement.

6
00:00:46.000 --> 00:00:50.000
You can do all the job directly on site with Tuner4TRONIC Field app.

7
00:00:51.000 --> 00:01:01.000
Let me showcase "Copy & Paste" to you

8
00:01:02.000 --> 00:01:08.000
for creating clones when replacing drivers in the application.

9
00:01:09.000 --> 00:01:13.000
Let's read a driver

10
00:01:14.000 --> 00:01:18.000
this is the driver they're going to replace

11
00:01:19.000 --> 00:01:20.000
and  that's the target driver.

12
00:01:21.000 --> 00:01:34.000
Pressing write will copy the data directly to the target driver.

13
00:01:35.000 --> 00:01:40.000
We can check the settings of the driver by reading a report.

14
00:01:41.000 --> 00:01:50.000
Go to report and press read driver settings.

15
00:01:51.000 --> 00:01:55.000
This will display a list of all data that's been programmed.

16
00:01:56.000 --> 00:01:59.000
You see, it's a driver of generation six.

17
00:02:00.000 --> 00:02:07.000
Copy and paste also works for drivers from one generation to next.

18
00:02:08.000 --> 00:02:11.000
Imagine the driver you're replacing has been installed a couple of years before

19
00:02:12.000 --> 00:02:13.000
and this driver is not available anymore.

20
00:02:14.000 --> 00:02:22.000
The family programming feature in Tuner4TRONIC allows you to map the data directly to next generation driver.

21
00:02:23.000 --> 00:02:28.000
If you scroll down you also find DALI addressing settings.

22
00:02:29.000 --> 00:02:33.000
In case the driver was used in a DALI network, the DALI address group and scenes have been copied, too.

23
00:02:34.000 --> 00:02:40.000
You can use this driver as a one by one replacement  - just plug and play no more re-commissioning.

24
00:02:41.000 --> 00:02:49.000
It will do exactly the same job like the driver that has been replaced.

25
00:02:50.000 --> 00:02:58.000
Reading report also helps you for analysis:

26
00:02:59.000 --> 00:03:00.000
You can export the readback file

27
00:03:01.000 --> 00:03:05.000
and import in the Tuner4TRONIC configurator for further processing.

28
00:03:06.000 --> 00:03:10.000
You can send it by mail or just upload to your own database.

29
00:03:11.000 --> 00:03:19.000
You can also import production files,

30
00:03:20.000 --> 00:03:26.000
send it to your mobile and program the production file to your target driver.

31
00:03:27.000 --> 00:03:37.000
Let me show you one more feature where we modify data in the driver without a production file:

32
00:03:38.000 --> 00:03:39.000
In this case we do not program all data but edit selected parameters, only.

33
00:03:40.000 --> 00:03:48.000
Let's take a 4DIM driver, since this one features D4i data.

34
00:03:49.000 --> 00:03:53.000
I'm going to show you how to edit luminarie info data

35
00:03:54.000 --> 00:04:01.000
First, let's read the driver

36
00:04:02.000 --> 00:04:07.000
other than modifying light output,  constant lumen output or dimming,

37
00:04:08.000 --> 00:04:14.000
let's edit "Additional Luminaire Info":

38
00:04:15.000 --> 00:04:19.000
This data is part of D4i.

39
00:04:20.000 --> 00:04:24.000
You can enter any text, for expamle some information on maintenance intervals

40
00:04:25.000 --> 00:04:32.000
or any other notes and save that info in the driver.

41
00:04:33.000 --> 00:04:40.000
You can also pick the GPS location and enter the location to your outdoor luminaire

42
00:04:41.000 --> 00:04:46.000
or you can pick a string directly from a QR code.

43
00:04:47.000 --> 00:04:55.000
it's way faster  to to pick data from QR code then typing long text.

44
00:04:56.000 --> 00:04:57.000
This reads the qr code.

45
00:04:58.000 --> 00:05:05.000
By the way: The qr code that I was reading is the URL of our DS webpage.

46
00:05:06.000 --> 00:05:16.000
Then press program and program the data to your driver.

47
00:05:17.000 --> 00:05:22.000
If the data string that you copied to luminaire info is a valid URL,

48
00:05:23.000 --> 00:05:30.000
you can open the URL by pressing this little icon.

49
00:05:31.000 --> 00:05:37.000
This will directly open the URL in the browser on your mobile.

50
00:05:38.000 --> 00:05:41.000
As said before, it's the URL of our webpage.

51
00:05:42.000 --> 00:05:43.000
I really encourage you to take a look,

52
00:05:44.000 --> 00:05:56.000
because this is where to find all information on Tuner4TRONIC - including SW and manual downloads.

53
00:05:57.000 --> 00:06:02.000
It also shows you some join-in tutorials

54
00:06:03.000 --> 00:06:11.000
to learn how to use the tools

55
00:06:12.000 --> 00:06:18.000
like the Tuner4TRONIC Field app tutorial.

56
00:06:19.000 --> 00:06:26.000
Before closing let me show you one more thing:

57
00:06:27.000 --> 00:06:31.000
For now I was using the native NFC antenna of the smartphone.

58
00:06:32.000 --> 00:06:50.000
This works totally fine with android devices, though it depends on the performance of the native NFC antenna of the phone.

59
00:06:51.000 --> 00:06:58.000
Since Apple is more restrictive, you need to use a external NFC reader with iOS devices.

60
00:06:59.000 --> 00:07:09.000
External NFC readers communicate to the phone via bluetooth and then via NFC to the driver.

61
00:07:10.000 --> 00:07:12.000
Let me introduce ECCO Smart from Feig:

62
00:07:13.000 --> 00:07:21.000
Let's go back to the application and instead of using the internal antenna.

63
00:07:22.000 --> 00:07:29.000
Switch on ECCO Smart and scan for bluetooth devices.

64
00:07:30.000 --> 00:07:47.000
Select ECCO Smart and read the report - same like we did before, but now using ECCO Smart.

65
00:07:48.000 --> 00:08:00.000
As you see, it works at a reasonable distance, since the NFC reader is way stronger than the antennas in the smartphones.

66
00:08:01.000 --> 00:08:11.000
I advise to use these readers because this will help to access drivers in luminaires,

67
00:08:12.000 --> 00:08:21.000
that may not be as easily accessible as this unmounted driver.

68
00:08:22.000 --> 00:08:24.000
This is what I wanted to present to you today.

69
00:08:25.000 --> 00:08:29.000
I hope, that you enjoyed the little teaser.

70
00:08:30.000 --> 00:08:38.000
Remember to check our webpage for any further information.

71
00:08:39.000 --> 00:08:48.000
Many thanks for watching and have a good day.